Digital Industrial Paper Cutting Machine Automatic With Program
Control
Specifications :
| Parameter | Unit | 78 | 92 | 115 | 130 |
| Cutting width | CM | 78 | 92 | 115 | 130 |
| Max.cutting height without assistance pressing plate | CM | 13 | 13 | 16.5 | 13 |
| Max.cutting depth | CM | 78 | 93 | 115 | 130 |
| Min cutting depth without assistance pressing plate | CM | 2.5 | 2.5 | 3 | 3 |
| Extended length of working table | CM | 64 | 65 | 73 | 73 |
| Height of working table | CM | 86 | 86 | 89 | 86 |
| Machine width including side working table | CM | 215 | 233 | 266 | 266 |
| Total length of working table | CM | 178 | 198 | 226 | 241 |
| Cutting speed | R/MIN | 45 | 45 | 45 | 45 |
| Manx. Paper pressure | N | 30000 | 35000 | 40000 | 40000 |
| Power of main motor | KW | 3 | 3 | 4 | 4 |
| Motor for paper feeding | KW | 0.75 | 0.75 | 0.75 | 0.75 |
| Air pump | KW | 0.55 | 0.55 | 0.75 | 0.75 |
| Machine weight | KG | 2500 | 2700 | 4000 | 3900 |
| Overall dimension | CM | 210*140*195 | 225*140*195 | 255*160*215 | 260*153*195 |
| Parameter | Unit | 137 | 155 | 166 | 186 |
| Cutting width | CM | 137 | 155 | 166 | 186 |
| Max.cutting height without assistance pressing plate | CM | 16.5 | 16.5 | 16.5 | 16.5 |
| Max.cutting depth | CM | 145 | 155 | 166 | 195 |
| Min cutting depth without assistance pressing plate | CM | 3 | 3 | 3 | 3 |
| Extended length of working table | CM | 74 | 75 | 75 | 75 |
| Height of working table | CM | 91 | 90 | 90 | 90 |
| Machine width including side working table | CM | 287 | 314 | 322 | 375 |
| Total length of working table | CM | 259 | 280 | 283 | 355 |
| Cutting speed | R/MIN | 45 | 42 | 42 | 40 |
| Manx. Paper pressure | N | 45000 | 55000 | 60000 | 65000 |
| Power of main motor | KW | 4 | 5.5 | 5.5 | 7.5 |
| Motor for paper feeding | KW | 1 | 1 | 1 | 1 |
| Air pump | KW | 0.75*2 | 0.75*2 | 0.75*2 | 0.75*2 |
| Machine weight | KG | 4500 | 5200 | 550 | 6800 |
| Overall dimension | CM | 280*160*215 | 296*165*215 | 315*160*215 | 340*182*230 |
Introduction:
It equipped with AC digital servo controlling technology and 7
inches colorful touching screen, the data resolution rate is
0.01mm, has self-diagnostic function of troubles and displays the
operating pattern, 100 program units, over 10000 different cutting
positions, it can memorize, store and dynamic follow-up. The max
paper-pushing speed is 5-15m/min. It adopts Japanese hydraulic
components, France, Japan and Korea electric components. Taiwan
ball lead screw and linear double guide-rail. PLC control system
for electric configuration. Its key parts adopt imported bearing of
low maintenance.IR ray protective device is more convenient for
cutting with optical knife-line alignment , button operated by two
hands, single circulation cutting device ect.
Main features:
A. Ball lead screw and linear guide-rail makes paper impeller run
smooth,low noise,accurate positioning,enhance the cutting precision
and speed greatly,prolong the service lift of paper cutter.
B. The working tables are all chrome-plated and equipped with air
balls which makes paper-pushing easily and rusty-proof.Large side
workingtable(1000*800) is optional.
C. IR photoelectric protection,buttons by two hands safety devices.
D. Safety device for knife bed, overloading protection for
cutting,automatic return safety device.
E. Imported hydraulic components are adopted in hydraulic
system,the pressure can be adjusted.The paper is pressed twice by
pressure-increased system.
F. Mechanical assistance device for knife replacement makes knife
replaced quickly and safely.
G. Equipped with the optical knife alignment to make cutting more
convenient.
H. PLC control system.
I. Ejecting device for knife bar.
J. Flat worm speed reducer transmission.
L. Multination langueage operation interface.
M. Carry on the block programming operation through the figures and
diagrams operation manual.
